According to the height of the substrate, the rear main beam is loosened by adjusting the connection screw between the main frame of the screen and the rear (no need to remove the screws), and the whole moves to the long hole Just the right place. The vertical adjustment range is 160 mm. 3, the printing frame of the substrate is designed to be movable left and right, and the three fixed aluminum strips at the bottom are directly installed on the two sides of the base. The aluminum strip base can be moved forward and backward by 300 mm; Mounting strip for the substrate positioning bracket.
The three mounting bars can be moved left and right as needed. Installation of aluminum bar displacement: Loosen the two screws of the mounting bar, move to a suitable position, and tighten the two screws to complete the positioning. 4, three sets of printing materials are used to place the rollers, which are metal bearing rollers (diameter 19 mm); nylon bearing rollers diameter plastic bearing rollers (diameter 50 mm), users can replace and use as needed. Both the main frame and the attached frame Install three rollers.
The bearing mounting bracket is directly fixed in the long hole of the aluminum strip installation, and can move up to 110 mm left and right according to the width of the substrate; 4 mounting brackets are attached, the bearing on the original main mounting bracket is removed, and the additional mounting bracket is directly fixed on the main with screws On installation, it is mainly used for printing conical products. The additional mounting bracket can be moved up and down by 20 mm. Feedback is very important to us.
It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.
If it's non-workdays, please kindly be patient and wait till Monday. This machine adopts the front and rear push-pull structure. The item "Curved Screen Printing Machine Cylinder Press Printer Kit cylindrical & conical" is in sale since Wednesday, May 20, 2020.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "alifastore" and is located in Rowland Heights, California.
This item can be shipped to United States.