Curved Screen Printing Machine Manual Cylinder Press Printer Kit Cylindrical USA. Curved screen printing machine is mainly used for cylindrical and conical products; such as cylindrical, conical products made of various plastics, glass, metal materials, including wine bottles, medicine bottles, cosmetic bottles and other packaging bottles; mark Cups, mugs, beer mugs, wine glasses and other cups; glass tubes, pens, ballpoint pens, fishing rods, bats and other small cylindrical products; pure water buckets, paint buckets, alcohol buckets, paint buckets, oil lubricants and other large Packaging cylindrical products. For cylindrical and conical products, the printing surface has large depressions or protrusions, and there are non-planar pits in the printing surface, which is not suitable for printing by this machine. This curved screen printing machine is mainly used for the printing of cylindrical and conical products with a diameter of less than 80 mm. The maximum printing height of this machine is 140mm, and the arc surface length is less than 160mm.
The machine adopts the height positioning structure of the printing screen plate frame, with a parallel placement plate at the front, and the whole machine is stable and stable during the printing process. Printing materials or tools such as ink tanks can be placed on the rear panel of the main unit. 2, the printing stencil frame adopts a spring-pulling lifting device, which can adjust the lifting force of the stencil with the basket screws. The lifting angle of the stencil frame can be controlled by adjusting the knob, making the operation simpler and easier.After the installation, the spring tension on both sides of the machine should be as consistent as possible, otherwise it may cause distortion of the printing screen frame. 3, the installation and removal of the frame is simple and convenient. Just loosen the four baffle screws under the printing screen plate holder, put the screen plate into and fix the baffle screws and the installation is complete. This machine is suitable for screen frames with a length of 300-200 mm; a width of 250 200 mm; and a screen frame with a thickness of 30 mm.
This machine comes with 2 net frames. 4, the screen frame slides back and forth using 2 sliders to connect with the optical axis, and the sliding operation is easy and smooth. 5, the sliding distance of the front and back of the screen frame can be controlled by the positioning ring on the optical axis; the user can lock the positioning ring after adjusting the position of the screen pattern and the placement table of the printed matter.
The special anti-collision rubber aprons are located between the positioning ring and the slider, so that the slider does not directly contact the metal positioning ring during the forward and backward sliding of the screen frame. It does not make the sound of collision between metals, and also protects various metal parts.
6, the printing scraper strip and ink-return strip rack adopts double-plate clamp type, which is convenient and quick to install and remove. The spring on both sides of the main frame and the frame is attached with a spring in the middle. And back to the ink plate pressure. 7, the push-pull handle of the screen can be installed vertically or in parallel according to the needs of the operator.
8, the substrate placement table uses a knob to lift and lock the structure. The substrate placing table can be controlled by the lifting handle under the placing table, first loosen the knobs on the two side baffles, and after lifting to a suitable height, tighten the locking knobs on the two side baffles to stabilize the lifting table at this height, Whether the height of the two sides of the substrate placement table can be adjusted by the concave and upper teeth of the baffle on both sides. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. The item "Curved Screen Printing Machine Manual Cylinder Press Printer Kit Cylindrical USA" is in sale since Thursday, August 20, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "alifastore" and is located in Rowland Heights, California. This item can be shipped to United States.